All values measured to ground unless otherwise noted
Conn./Plug/Pin Pin Information Test Value Comments
Z37/2,
Z37/3
     
Z37/2 CAN Class C bus (low side). High speed data transfer bus input and output, exchanges data with other ECMs No reliable test. Check continuity to other ECMs. Approx. 5 VAC when data is on bus Also ECMs can
cause CAN-Bus DTCs
Z37/3 CAN Class C bus (high side). High speed data transfer bus input and output Disconnect all CAN plugs from appropriate ECMs, measure between Z37/2 and Z37/3
> 20 kOhms.
ECM internal resistance with plugs disconnected
N3/10 pins D11 and D12 approx. 120 Ohms
See also Z37/2
HHT is also used for
CAN diagnosis
Note 1 N73 is gateway for data exchange between CAN Class C and Class B bus. Refer to
PE00.19-U-2300C for CAN Class B bus