| All values measured to ground unless otherwise noted | |||
| S16/1 | |||
| 1 | Circuit 15 input supplies backup lamp function | Ignition on 12 VDC | Feed from F3f29 |
| 2 | Backup lamp signal output | Ignition on lever in position R - 12 VDC | see also S16/1 pin1 |
| 3-7 | pins not used | ||
| 8 9 |
Circuit 50 starter lockout signal input Circuit 50 starter lockout signal output |
Lever pos P or N 12 VDC with key held in start position |
Note 1 |
| S16/6 | |||
| 2 4 |
Kickdown enable power input from BM enables kickdown valve depending upon engine rpm and speed signal | Engine at idle 12 VDC Engine off < 1 VDC |
|
| S65 | |||
| 1 2 |
Transmission overload protection signal input, to reduce power in case of AT overload | Engine at idle, gear range selector in pos P or N > 4 VDC, D < 1 VDC |
|
| Note 1 | As of MY 93 relay K38 is installed. Activation from ATA system | ||