| All values measured to ground unless otherwise noted | |||
| N10 | |||
| 2 | Main ground to W1 | Approx. 0 Ohms to ground | |
| 11 | Washer activation signal input, initializes one wipe process |
Ignition on, press and hold S4 to resistance point 12 VDC |
generated by S4s4 |
| 13 | Circuit 15R wiper system relay power input | Ignition on 12 VDC | Feed from F2f15 |
| 14 | Fast wipe mode signal output | Ignition on, S4 to pos III 12 VDC | Wiper fast mode |
| 15 | Interval/fast wipe activation signal input | Ignition on S4 to pos I <6 VDC S4 to pos II 12 VDC |
generated by S4s7 generated by S4s9 |
| 16 | Wiper arm "Parked" recognition, switched ground input | ||
| Note | Due to various functions, N10 is split up in several system diagrams, therefore only the related pins are listed. Pins not shown are non relating for this system. | ||