All values measured to ground unless otherwise noted
Conn./Plug/Pin Pin Information Test Value Comments
N25/5      
1 R/F seat cushion and backrest heater element
power output
Ignition on: 12 VDC with S51/2 in pos. I or II
measure to pin 4 12 VDC in pos. I
 
2 Circuit 15R power input 12 VDC with ignition key in position "1" Feed from F1f21
3 L/F seat cushion and backrest heater element
power output
Ignition on: 12 VDC with S51/1 in pos. I or II
measure to pin 19 12 VDC in pos. I
 
4 Circuit 30 power input 12 VDC at all times Feed from F1f25
  Main ground to W18 Approx. 0 Ohms to ground  
  Circuit 58d power input 12 VDC with lights on  
Note HS system will be turned off automatically after approx. 30 min.
Rapid mode is limited to 5 min. operation time
System is deactivated when battery charging is low, also when too many consumers are switched on at the same time. Indicator lamp will be blinking