MODELS   202 as of 1.6.97

Function prerequisites no overvoltage/undervoltage circuit 15 off and circuit 15R off and circuit 15C off detected Function The convenience closing function of the tilting/sliding roof is only available in the normalized state. The overhead control panel control module (N70) receives over CAN the request for convenience closing of the tilting/sliding roof and then actuates the tilting/sliding roof motor (M12/1).

The direction in which the motor is actuated depends on whether the sliding roof or the tilting roof is open. The motor is actuated until the overhead control panel control module (N70) through the position measurement detects that the tilting/sliding roof is closed. The function is aborted if the request over CAN is no longer received or lock-up of the tilting/sliding roof is detected or the function requirements listed above are no longer satisfied.

	Power tilting/sliding roof (SR [SHD]) function		GF77.20-P-0001A
	Convenience feature, function		GF80.45-P-0003A
	Close tilting/sliding roof (SR), function		GF77.20-P-2002A
	Tilting/sliding roof (SR) normalization, function		GF77.20-P-3002A
	Sliding/pop-up roof lock-up recognition, function		GF77.20-P-3000A
	Tilting/sliding roof (SR) position measurement, function		GF77.20-P-3001A