GF82.20-P-2007A Switching on interior lighting with anti-theft alarm, function 15.12.96

MODEL  202 as of 1.6.97


When the anti-theft alarm (ATA) trips or the taxi emergency alarm is actuated the interior lighting is switched on. The PSE control module (combined) (A37) sends a corresponding CAN message during the alarm. The overhead control panel control module (N70) switches on the front dome lamp (N70e1). The rear dome lamp (E15/3) is switched on by the PSE control module (not on model 208.4). In the case of a taxi emergency alarm only the rear dome lamp (E15/3) is switched on.
  If the alarm is interrupted the interior lighting is switched back off.




On model 210 with code 877 dome lamp (E15/3e3) and reading lamps (E15/3e1, E15/3e2) are switched on in the rear dome lamp (E15/3).

Control of interior lighting switch-on time, function   GF82.20-P-3001A
Dimming interior lighting, function   GF82.20-P-3002A
Control of rear dome lamp, function   GF82.20-P-4005A
Overhead control panel control module, location/purpose/design/function   GF82.20-P-4101A